How to Select the Correct CCTV Camera to Use?

There are literally thousands of camera models from hundreds of approved manufacturers available in the market, and this makes the selection of the most appropriate CCTV camera to use a very confusing issue.

In this article, I will try to explain very simply the different parameters you need to look into when selecting a CCTV camera for your project, as well as the required knowledge to determine if what you are being offered really matches what you expect or not.
Please note that I will be discussing IP Cameras here and not analog. As explained in my previous article “Analog CCTV vs IP Cameras – What’s the Correct Choice?” – analog CCTV is not recommended anymore.

Key parameters for selecting the proper type of CCTV camera:

1. Outdoor/Indoor: One of the parameters that can be easily filtered by available choices is whether the camera is for indoor or outdoor use. While it is essential to use an “outdoor” type camera for outdoor installations to provide IP65/IP66 weather protection, “indoor” cameras are less bulky and more cost effective for indoor installations.

   Outdoor Camera

   Indoor Camera

2. Coverage Area / Target Distance: The second most important parameter in selecting the correct type of camera is to determine the coverage area and target distance for each camera in your system. Below are some of the key camera parameters that will be determined based on the coverage area / target distance:
   • Fixed vs PTZ: PTZ (Pan-Tilt-Zoom) cameras as the name suggests give the possibility to user to turn the camera view to any needed direction and to zoom on specific areas. They can be also pre-programmed to automatically scan specific routes. On the other hand, fixed cameras provide constant uninterrupted monitoring of a specific, fixed area like entrances and exits or perimeters.
     
     

     pan-tilt-zoom
   • Type of Lens: the type of lens determines the angle width and the distance that each camera can cover. As a rule of thumb, the wider the coverage angle is, the less distance is covered by the camera. Using a vari-focal lens enables you to adjust these two parameters of the camera in practice. There are also 180 degrees or 360 degrees fisheye cameras that are used indoors for providing a wider coverage.
     
     

     180 Panoramic View
     
     

     360 Fisheye View
3. Image Resolution: in IP cameras, this is determined by number of pixels (color dots) that each camera image consists of. The higher the image resolution, the more image details is captured and provided by the camera. At the same time, more storage capacity would be required for recording. The current common resolutions these days start from 720p HD (1280 x 720 pixels) and go up to 5MP (5 Megapixel or 2592 x 1944 pixels).
   
   

   Camera Resolution Chart
   
   

   Advantage of IP Cameras
4. Night Vision / IR: If you require capturing video in darkness, then you should look for cameras with day/night and IR (infrared) lighting configurations. IR cameras use infrared LEDs that are lit automatically when dark and enable the camera to capture black & white video in complete darkness. The coverage of cameras in the darkness is determined by the power of their IR light which is a parameter you should look into when selecting such cameras.
   
   

   Security Cameras with Nightvision
5. Camera Housing: camera housing is also an important factor to consider when selecting your camera. Below are the main types:
   • Dome Cameras: Dome cameras are used both for indoors and outdoors for both fixed and PTZ cameras. They have a nice look and it is also hard to determine which direction the camera is pointing at.
   • Box Cameras: These cameras are also used both indoors and outdoors and are the standard type of security cameras we all have an image of in mind. The lens and direction of the cameras are clearly visible and clearly show everyone that the location is under CCTV surveillance.
   • Bullet Cameras: These are small, cylindrical type, waterproof housings that are usually used for outdoor cameras especially when you don’t want the cameras to capture much attention.
6. Vulnerability: Apart from indoor/outdoor type of cameras, you might also want to select “vandal-resistant” cameras that come with very-hard-to-break glass covers to protect the camera against vandalism. There are also Explosion-proof cameras that are extremely expensive and protect the camera against explosions.

   Explosion-proof Camera

   Anti-Vandal Camera

7. Other features: In addition to above main parameters, new IP cameras also come with a constantly-expanding list of new features and enhancements – these include video analytic and enhancement features, web interface for direct view and remote monitoring and control, automatic alert notifications via email and SMS, and even internal NVR for recording of videos. So these are also the parameters you might want to check into.

Please note while I’ve tried to focus only on the key factors, it is also important to emphasize that designing a professional CCTV solution still requires a high level of expertise and experience and it is always worth it to have a professional company involved in designing the proper CCTV solution tailored for your needs.

About Vizocom

Vizocom is a leading ICT and ELV solutions provider with over 25 years of experience in design, installation and commissioning of the complete portfolio of ICT and ELV solutions, including structured cabling, microwave, VSAT, telephony and VOIP, Video Conferencing, safety and security systems, PAGA and SMATV and IPTV solutions.

Category: Cameras ELV IP Cameras

IPTV VS Analog MATV – What’s the correct choice for distributed TV entertainment?

One of the key requirements in every hospitality infrastructure (being it a hotel or a man-camp for a remote oil and gas site) is to provide the guests with a selection of TV entertainment channels in each room.

These solutions usually consist of a “head end” system where satellite and/or terrestrial TV channels are captured and then distributed over the TV network to each TV installed in the rooms.

Up until only a few years ago, the only well-known solution was MATV (Master Antenna TV also known as SMATV – Satellite Master Antenna TV), where the TV channels were “modulated” at the head end over different TV channel frequencies and then distributed over a coaxial distribution network.
Recently however, there is a growing demand for IPTV solutions. As the name suggests, an IPTV system depends on LAN infrastructure (computer network) to fulfil the same function.

Benefits of IPTV over MATV/SMATV

IP-based technologies are for sure the future of everything and the same is true here! There are many benefits of an IPTV system over an MATV/SMATV – some of the most important ones are:

1. Higher picture quality: an analog MATV system is highly susceptible to poor image quality and distortions like ghost images and snowy pictures, while in a well-implemented IPTV system, there is zero downgrade of picture quality.
2. Unified communication medium: if there is a proper LAN infrastructure in place or if we’re talking about a complete new installation, IPTV would not need separate cabling apart from the LAN infrastructure while for MATV, separate coaxial cabling would be required.
3. More channels: while in an analog MATV the total number of channels that can be broadcasted is limited to 80, in an IPTV system there is no such limitation as long as the proper LAN infrastructure is in place.
4. Interactivity: unlike analog MATV which is a one-way system, IPTV solutions provide 2-way interaction giving access to great features such as internet browsing, Video on Demand (VoD) and customized hospitality features.
5. Wide distributions: as IPTV is based on IP technology, the solution can be distributed over wide areas in such a way that there are now many providers who offer IPTV services over the internet.

Challenges of IPTV
Based on the above benefits of an IPTV system, should you go ahead and replace your existing SMATV tomorrow? Well, there are key challenges that might make this a difficult decision to make:

1. Need for a good LAN infrastructure: IPTV systems can’t be implemented just over ANY existing data network. You need to make sure the existing network can actually support the required bandwidth for the IPTV multicast packets and that the network switches do support features such as IGMP Snooping. If not, you end up with a flooded data network and totally unusable, jittered TV images.
2. High Equipment Costs: Although like all such new technologies, the price of IPTV equipment is sharply dropping every year, the extra costs can still be a decisive factor here.

The other alternative: DVB MATV

In cases where there is a lack of a strong LAN infrastructure, replacing poor quality SMATV systems with IPTV would not seem cost effective. However, there is still another alternative to consider: DVB MATV (Digital Video Broadcast). These systems also work over the same coaxial network used by MATV, but broadcast the channels in DVB (digital) format so they would be a mid-way but cost effective solution to considerably enhance the picture quality of an old MATV system without the need to change the cabling structure. (This is considerable for the renovation of entertainment systems for large hotels where the re-cabling of the whole building would be too much trouble).

Future of TV Entertainment

With no doubt, analog MATV systems are rapidly becoming outdated and replaced by IPTV systems. It would be up to the current MATV owners to decide the “right time” for the swap!

About Vizocom

Vizocom is a leading ICT and ELV solutions provider with over 25 years of experience in design, installation and commissioning of the complete portfolio of ICT and ELV solutions, including structured cabling, microwave, VSAT, telephony and VOIP, Video Conferencing, safety and security systems, PAGA and SMATV and IPTV solutions.